10 Best HDMI Splitters for Gaming Consoles in 2026: 4K, 120Hz, and Easy Setup

Choosing among HDMI splitters for gaming consoles can be confusing because similar-looking devices support very different resolutions, refresh rates, and signal standards. The right model depends on whether you need one console on two displays, multiple consoles on one TV, or a high-refresh 4K gaming setup.

This roundup compares 10 selected HDMI switches and splitters by output design, supported video performance, connectivity, controls, and practical installation features. Use the buying guide below to narrow the list based on your console, display, and setup goals.

Best 10 Hdmi Splitters for Gaming Consoles Picks for 2026

Best for 8K Gaming Setups – 3-in-1 HDMI 2.1 Switch

For shoppers comparing HDMI splitters for gaming consoles, this 3-in-1 HDMI 2.1 switch is designed to connect three source devices to one TV or monitor. It supports up to 8K at 60Hz, 4K at 120Hz, and 48Gbps bandwidth for compatible gaming hardware and displays.

Best For: Gamers who want to connect multiple HDMI 2.1 consoles or devices to one display while retaining high refresh-rate support.

Pros:

• Supports 4K@120Hz, 8K@60Hz, 1080p@240Hz, and up to 48Gbps.
• Connects three HDMI sources to one display in a compact aluminum housing.
• Includes an HDMI cable and requires no separate power adapter.

Cons:

• Manual button switching only; automatic switching is not supported.
• At least two powered source devices may be needed for stable operation.
• Low-power devices may require a short, high-quality HDMI cable.

This is a strong choice for a high-bandwidth gaming setup, especially when 4K/120Hz performance matters. Its main trade-off is the lack of remote or automatic switching.

Best for Mirroring Four Displays – Powered 1-in-4 HDMI Splitter

Among HDMI splitters for gaming consoles, this powered model is suited to sending one console or media source to four screens at the same time. It supports 4K at 30Hz, 1080p at 60Hz, 3D video, and mirror-only output.

Best For: Home theaters, gaming demonstrations, classrooms, or other setups that need the same console image on up to four displays.

Pros:

• Distributes one HDMI input to four identical outputs simultaneously.
• Includes a 5V/2A AC adapter for stable powered transmission.
• Metal housing helps with heat dissipation and EMI protection.
• Supports transmission distances up to 100 feet total and cascading.

Cons:

• Supports mirror mode only, not extended displays.
• Limited to 4K@30Hz rather than 4K@60Hz or 4K@120Hz.
• It is a splitter, not a switch, and does not include a remote.

This MT-ViKI unit makes sense when duplicate viewing is the priority and four outputs are useful. It is less suitable for competitive gaming where higher 4K refresh rates are important.

Best for Multiple Console Inputs – UGREEN 5-Port HDMI Switch

If you are shopping for HDMI splitters for gaming consoles but need to connect several devices to one TV, this UGREEN model functions as a five-input HDMI switch. It supports 4K at 60Hz, HDR, VRR, 3D, and 18Gbps transmission for compatible consoles and displays.

Best For: Multi-console entertainment centers that need five HDMI inputs, remote control convenience, and 4K/60Hz output.

Pros:

• Provides five HDMI inputs through one TV or monitor connection.
• Supports 4K@60Hz, 1440p@120Hz, 1080p@240Hz, HDR, VRR, and 3D.
• Includes a remote, manual button, USB power cable, and input LED indicators.
• Compatible with PS5, Xbox, Nintendo Switch, Roku, laptops, and other HDMI devices.

Cons:

• Requires USB power; a power adapter is not included.
• Automatic switching is not supported.
• Does not support ARC/eARC, and HDMI cables are not included.

This is a practical option for crowded gaming setups where five devices share one display. The remote improves convenience, but buyers must supply a USB power adapter and switch inputs manually.

Best for Long-Distance Mirroring – 4K 1-in-4 HDMI Splitter

This powered HDMI splitter is a useful choice among HDMI splitters for gaming consoles when one source needs to appear on four displays in different rooms or at a distance. It supports 4K at 30Hz, 1080p at 120Hz, and transmission up to 100 feet with suitable cables.

Best For: Mirroring a console or media source across four screens in larger homes, basements, presentations, or backyard theater setups.

Pros:

• Duplicates one HDMI source to four displays with synchronized audio and video.
• Supports 4K@30Hz, 1080p@120Hz, and 3D video.
• Includes a UL-certified 5V power adapter for stable operation.
• Supports up to 100 feet of total transmission with AWG26 HDMI 2.0 cables.

Cons:

• Mirror-only output does not support extended displays.
• 4K output is limited to 30Hz.
• Requires appropriate HDMI 2.0 cables for the advertised distance.

The Happfeel splitter stands out for long cable runs and high-refresh 1080p gaming across multiple screens. For 4K gaming, its 30Hz limit makes it better suited to casual viewing than high-performance play.

Best Multi-Device Switch – Anker 4-in-1 HDMI Switch

For gamers who need to connect several consoles or other HDMI sources to one display, this Anker model is a practical choice among HDMI splitters for gaming consoles. It provides four HDMI inputs, supports 4K, HDR, 3D, Dolby, and DTS, and lets you change sources with a remote or one-click control.

Best For: Gaming setups with multiple HDMI devices sharing one TV or projector.

Pros:

• Four HDMI inputs connect multiple devices to one display.
• Supports 4K video along with HDR, 3D, Dolby, and DTS.
• Includes a remote control for convenient source switching.
• Includes a USB-A to USB-C charging cable and an 18-month warranty.

Cons:

• This is a switch, not a device for displaying one source on two screens simultaneously.
• HDMI cables, charger, and batteries are not included.
• Does not support HDMI CEC.

The Anker switch is best when your main goal is reducing cable swapping between several gaming and entertainment devices. Its remote operation and broad format support add convenience, but shoppers specifically seeking mirrored output should choose a true splitter instead.

Best True Display Duplicator – OREI 1×2 4K HDMI Splitter

If you need to mirror a console signal on two displays, this OREI unit is one of the more purpose-built HDMI splitters for gaming consoles. It accepts one HDMI source and duplicates it to two outputs, with support up to 4K at 30Hz and compatibility with devices such as Xbox and PlayStation consoles.

Best For: Mirroring one gaming console or HDMI source on two TVs or monitors.

Pros:

• One HDMI input feeds two identical HDMI outputs.
• Supports resolutions up to 4K at 30Hz, plus 1080p and 3D formats.
• Works with gaming consoles, TVs, monitors, Blu-ray players, and projectors.
• Includes a power adapter and a heavy-duty metal enclosure.

Cons:

• Duplicates the display only; it cannot extend a desktop across two screens.
• Does not bypass HDCP and does not support HDCP 2.0 or 2.2.
• For best picture quality, HDMI cables should be 30 feet or shorter; cables are not included.

Choose the OREI when mirrored gameplay is the priority rather than independent images on two screens. Its 4K support is limited to 30Hz, so verify your console and display requirements before buying.

Best Budget Manual Switch – GANA 3-in-1 HDMI Switch

The GANA 3-in-1 is a compact option for gamers who want to connect three HDMI sources to one display. Although often considered alongside HDMI splitters for gaming consoles, it is a manual HDMI switch rather than a two-display splitter, and it supports 4K only at 30Hz.

Best For: Budget-conscious gamers switching among up to three consoles or HDMI sources on one screen.

Pros:

• Connects three HDMI sources to one display.
• Manual button switching changes inputs without unplugging devices.
• Supports 4K at 30Hz, 3D, HD audio, and HDCP compliance.
• Includes a fixed 1.8-foot HDMI cable and USB-C power cable.

Cons:

• Cannot display two monitors simultaneously or extend the display.
• 4K gaming consoles may require manual adjustment to output at 4K30Hz.
• Requires USB-C power to remain connected during use.

This GANA switch makes sense for a simple, low-cost setup where several consoles share one TV. It is less suitable for high-refresh 4K gaming or anyone who needs the same signal sent to two displays.

Best 4K Dual-Display Pick – OREI UltraHD 4K 1×2 HDMI Splitter

For gamers looking at HDMI splitters for gaming consoles, the OREI UHDS-102 is a practical choice for mirroring one console or media source to two displays. It supports up to 4K at 60Hz, 18 Gbps bandwidth, and a broad range of audio formats, including Dolby and DTS options.

Best For: Mirroring a PS4, Xbox, streaming device, or other HDMI source to two 4K displays.

Pros:

• Supports 4K at 60Hz with 18 Gbps bandwidth and 4:4:4 8-bit color.
• Works with PS4, Xbox, Roku, Fire TV, Apple TV, Blu-ray players, and other HDMI devices.
• Supports 3D and multiple stereo, Dolby, DTS, and LPCM audio formats.
• Includes a 100–240V auto-switching power supply and a one-year warranty.

Cons:

• Mirrors the same image rather than extending the desktop or creating independent screens.
• Does not bypass HDCP.
• HDMI cable runs longer than 30 feet may not work reliably.

The OREI stands out when your priority is a higher-resolution two-display mirror with flexible audio support. Confirm that your setup only needs duplication, not separate game views on each screen.

Budget 4K Mirroring Pick – avedio links 4K 1×2 HDMI Splitter

The avedio links splitter is a compact option for shoppers comparing HDMI splitters for gaming consoles on a budget. It duplicates one HDMI signal to two displays, supports 4K at 30Hz, and includes a 4-foot HDMI cable for getting started.

Best For: Mirroring a console or video source to two displays when 4K at 30Hz is sufficient.

Pros:

• Duplicates one HDMI input to two displays simultaneously.
• Supports 4K at 30Hz and lower resolutions, including 1080p and 720p.
• Includes a 4-foot HDMI cable and USB power cable.
• Supports several formats, including DTS-HD, Dolby TrueHD, LPCM 7.1, and Dolby AC3.

Cons:

• Does not extend screens or show different content on each display.
• Supports HDCP 1.4 but is not compatible with HDCP 2.2.
• Power adapter is not included, and 4K cable runs are advised to stay within 16 feet.

This model makes sense for straightforward console mirroring and older or 1080p-focused setups. Its 4K limit of 30Hz and HDCP 1.4 support are important compatibility checks before buying.

Most Flexible Switching Pick – WARRKY Bidirectional HDMI Switch

Unlike a conventional powered splitter, the WARRKY is a bidirectional HDMI switch for gaming consoles: it can connect two sources to one display or one source to two displays. It supports 4K at 60Hz, HDR, and HDCP 2.2, but only one display works at a time in display-switching mode.

Best For: Gamers who need to switch between two consoles or toggle one console between two displays.

Pros:

• Supports 4K at 60Hz, 2K at 144Hz, HDR, 3D, and HDCP 2.2.
• Works with PS3, PS4, PS5, Xbox consoles, Nintendo Switch, Roku, and Fire TV.
• Bidirectional design supports two sources to one display or one source to two displays.
• Includes a fixed 3.3-foot braided HDMI cable and an aluminum housing.

Cons:

• It switches between displays rather than powering both displays simultaneously.
• It is a switcher, not a conventional dual-output splitter for simultaneous duplication.
• It is not intended for ARC.

The WARRKY is the better fit when your main problem is changing inputs or selecting which display is active. Choose a powered 1×2 splitter instead if you need the same console image on two screens at the same time.

How We Picked These Hdmi Splitters for Gaming Consoles

We focused on the specifications that matter most in console setups: input and output configuration, maximum resolution and refresh rate, bandwidth, HDR and HDCP compatibility, power requirements, and switching method. The selection includes true splitters for sending one source to multiple displays as well as HDMI switches, which let several sources share one display. That distinction is important because these devices solve opposite connection problems.

We also considered practical details such as included cables, remote controls, metal housings, fixed pigtail cables, and advertised transmission distance. Compatibility claims should still be checked against the exact console, television, monitor, and cable combination.

Quick Comparison

• For 4K at 120Hz: Choose a model explicitly rated for HDMI 2.1, 48Gbps, and 4K@120Hz.
• For 4K at 60Hz: Look for 18Gbps support, HDR compatibility, and reliable HDCP handling.
• For one console and two screens: Use a 1-in-2-out splitter, provided both displays support the shared output mode.
• For multiple consoles and one TV: Use a 2-in-1, 3-in-1, 4-in-1, or 5-in-1 HDMI switch.
• For larger multi-display systems: A powered 1-in-4 splitter is generally more suitable than a compact unpowered adapter.

Key Buying Factors for Hdmi Splitters for Gaming Consoles

Resolution, Refresh Rate, and Bandwidth

Match the splitter or switch to the performance you actually want. 4K@60Hz is adequate for many TVs and standard console play, while 4K@120Hz requires substantially more bandwidth and HDMI 2.1 support. A device advertised only for 4K@30Hz may limit motion smoothness and should not be selected for high-refresh gaming.

Splitter Versus Switch

A splitter duplicates one HDMI source across multiple outputs; it does not combine multiple consoles into one output. A switch does the reverse by selecting one of several inputs. Some products are bidirectional, but confirm the intended direction and whether automatic switching is supported.

HDCP, HDR, VRR, and Audio

HDCP version compatibility affects whether protected video displays correctly. HDR and VRR support can also vary by resolution and refresh rate. If you use a soundbar, AV receiver, or gaming headset, verify that the device passes the required audio formats instead of assuming every HDMI feature is preserved.

Power, Cables, and Distance

Powered splitters are usually preferable for multiple outputs, longer cable runs, or demanding signals. Use certified cables rated for the target bandwidth, and treat maximum transmission distances as installation-dependent rather than guaranteed in every environment.

Who Should Buy Which Hdmi Splitters for Gaming Consoles?

Buy a 4K@120Hz HDMI 2.1 model if you have a PS5, Xbox Series X, or gaming PC paired with a 120Hz 4K display and want to preserve high-refresh performance. Choose a 1-in-2 splitter for mirroring one console to a TV and capture device or a second display. Select a 1-in-4 powered splitter when one source must feed several screens. Choose a multi-input switch if your main problem is limited TV HDMI ports rather than distributing one signal. For a simple older 4K or 1080p setup, a compact model with an included cable may be the most economical choice.